Our most important tips on how to use your Evoke Play

1. Before operating the product, always consult the Evoke Play User Guide as well as the Quick Start Guide. You can find both in our Download Center.

1. Before we start, we state the obvious. Please make sure your Evoke Play is properly connected to a power source. Make sure that the antenna is fully extended, and all plastic covers are removed.

1. Switching Evoke Play on/off

Pressing the “Volume” - on/off button will boot your Evoke to the last source listened. When your Evoke is turned on for the first time, it runs through a setup wizard to configure settings for date/time and network. Once this has finished, the system is ready to use in most modes.

1. Scanning and selecting DAB+ or FM Stations

We have two separate articles on these topics that you can select by clicking on the highlighted words.

1. Saving or recalling a preset

The Evoke Play offers two methods to save presets. These can either be saved to one of the 4 quick preset buttons or added to the preset list.

Pressing one of the quick preset buttons until "Preset stored" appears, will save the station currently listened to. Short press the preset button to recall it. More details can be found here.

1. Changing the source

This is kept straight forward. Pressing the "Source" button will open the source window. If you want to know more about the source options, read this article here.

1. Pairing a Bluetooth device

Press the Bluetooth button and the Evoke Play will enter pairing mode. More detailed instructions on how to find your Evoke Play on the device you want to pair and more on pairing with BT can be found here.

1. Setting an alarm

The Evoke Play has 2 individual alarms you can set. We have created a detailed step-by-step help article to explain the details here.

1. Adjusting the display brightness in Standby and On mode

Evoke Play gives you various customization options to adjust the display brightness. Each of these functions is described in the respective help article linked here.

1. The equalizer

The EQ settings can be reached via the Main Menu. Find more details here.