Our most important tips on how to use your Classic Stereo

1. Before operating the product, always consult the Classic Stereo Quick Start Guide.

You can find the QSG for Classic Stereo in our Download Center.

1. Before we start, we state the obvious.

Please make sure you have properly connected your speakers to the Classic Stereo before the device is connected to a power source.

Make sure that the antenna is fully extended and all plastic covers are removed.

1. Switching Classic Stereo on/off

Pressing the Standby on/off button will boot your Classic Stereo to the last source listened. When you use Classic Stereo for the first time, it runs through a setup wizard to configure settings for date/time and network. Once this has finished, the system is ready to use in most modes.

1. Scanning and selecting DAB+ or FM Stations

We have two separate articles on these topics that you can select by clicking on the highlighted words.

1. Saving or recalling a preset

The Classic Stereo offers two methods to save presets. These can either be saved to one of the 4 quick preset buttons on the remote control or added to the preset list.

Pressing one of the quick preset buttons until "Preset stored" appears, will save the station currently listened to. Short press the preset button to recall it. More details can be found here.

1. Changing the source

This is kept straight forward. Pressing the "Source" button will open the source window. If you want to know more about the source options, read this article here.

1. Pairing a Bluetooth device

Press the BT button and the Classic Stereo will enter pairing mode. More detailed instructions on how to find your Classic Stereo on the device you want to pair and more on pairing with BT can be found here.

1. Setting an alarm

The Classic Stereo has 2 individual alarms you can set. We have created a detailed step-by-step help article to explain the details.

1. Adjusting the display brightness in Standby and On mode

Classic Stereo gives you various customization options to adjust the display brightness. Each of these functions is described in the respective help article linked here.

1. Selecting the equalizer modes

The different modes can be reached by pressing the EQ button on the remote control. Find more details here.