You would like to set up a stereo pair with a second Woodland Glow speaker?

1. Power on the main speaker and connect a source via Bluetooth or the AUX input.

2. Power on the second speaker and make sure it is in pairing mode.

3. By long pressing the “Bluetooth” button for 8 seconds, the units will connect in stereo mode. A confirmation sound will be heard, indicating that the stereo pairing was successful.

The main speaker will play the sound of the left channel.

To disconnect the currently used Bluetooth device and connect another, simply press the “Bluetooth” button for 2 seconds to pair the new device.

Keeping the “Bluetooth” and “Skip Track Forward” button pressed on the main unit for 8 seconds will un-group the stereo pair and reset the speaker.

The white battery status LEDs will run from left to right and back to indicate a successful un-grouping.

Pair a Bluetooth device again to listen to one speaker.